Panatex Collection - Additional Information
Custom-design is an essential ingredient in this business. Advanced communications linked with our design resource means that new briefs from anywhere in the world can be undertaken and progressed with professional efficiency.
The Panaz fabric portfolio embraces designs for use in all areas within hospitals and related healthcare environments, including clinical, recuperative, public and staff-only sectors. Prints, plains and semi-plains coordinate in a series of carefully selected colour stories to create a calm, serene and balanced ambience. All Panaz fabrics conform to current flame retardant specifications and the Company is an approved supplier to the NHS, carrying National Contract Reference B/3/N/2057G.
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio612428.main.001-panatex-montreal-117-royal.jpg
Colourway
Base Cloth
117 Royal
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613053.main.002-panatex-montreal-200-green.jpg
Colourway
Base Cloth
200 Green
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613123.main.003-panatex-montreal-301-saffron.jpg
Colourway
Base Cloth
301 Saffron
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613187.main.004-panatex-montreal-310-goldblue.jpg
Colourway
Base Cloth
310 Gold Blue
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613244.main.005-panatex-montreal-407-burgundy.jpg
Colourway
Base Cloth
407 Burgundy
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO Res. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613306.main.006-panatex-montreal-408-terracotta.jpg
Colourway
Base Cloth
408 Terracotta
Montreal
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 Ignition souce 0,1 and 5, EN 1021/2, IMO RES. A652 (16), B1 Germany, NFPA260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613657.main.007-panatex-ontario-100-blue.jpg
Colourway
Base Cloth
100 Blue
Ontario
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613753.main.008-panatex-ontario-204-moss.jpg
Colourway
Base Cloth
204 Moss
Ontario
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613811.main.009-panatex-ontario-304-maize.jpg
Colourway
Base Cloth
304 Maize
Ontario
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613873.main.010-panatex-ontario-404-henna.jpg
Colourway
Base Cloth
404 Henna
Ontario
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Marindale rubs
50,000 Marindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613926.main.011-panatex-ontario-609-rose.jpg
Colourway
Base Cloth
609 Rose
Ontario
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio613986.main.012-panatex-quebec-100-blue.jpg
Colourway
Base Cloth
100 Blue
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614109.main.013-panatex-quebec-117-royal.jpg
Colourway
Base Cloth
117 Royal
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614184.main.014-panatex-quebec-211-spruce.jpg
Colourway
Base Cloth
211 Spruce
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614235.main.015-panatex-quebec-231-olive.jpg
Colourway
Base Cloth
231 Olive
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614299.main.016-panatex-quebec-313-yellow.jpg
Colourway
Base Cloth
313 Yellow
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614365.main.017-panatex-quebec-405-crimson.jpg
Colourway
Base Cloth
405 Crimson
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio614431.main.018-panatex-quebec-408-terracotta.jpg
Colourway
Base Cloth
408 Terracotta
Quebec
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
410
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% filament polyester, aqueous polymer coating
100% filament polyester, aqueous polymer coating
Martindale abrasion resistance:
50,000 Martindale rubs
50,000 Martindale rubs
End use:
Waterproof, breathable, anti-bacterial upholstery jacquard
Waterproof, breathable, anti-bacterial upholstery jacquard
BS5852 ignition source 0,1 and 5, EN1021/2, IMO RES. A652 (16), B1 Germany, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.
Vacuum and wipe clean regularly with a damp cloth such as specified above and water to remove dust particles and prevent build up of grime. Take care not to cause abrasive damage. Remove spillages immediately with an absorbent dry cloth. For heavier soiling, use a mild proprietary cleaner and warm water ensuring that cleaning product residues are removed as this inhibits the stain repellent. Bodily fluids should be removed immediately with cold water and then cleaned as above. Water and oil based stains may be removed by using most water based proprietary spray cleaning agents, following instructions carefully. More stubborn stains may require a safe solvent such as Isopropyl Alcohol or mineral spirit. Extreme soiling may be cleaned with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Panatex Collection Fabric Design: Montreal
In order to view a design in more detail or to order a free sample, click on an image below.
Panatex Collection Fabric Design: Ontario
In order to view a design in more detail or to order a free sample, click on an image below.
Panatex Collection Fabric Design: Quebec
In order to view a design in more detail or to order a free sample, click on an image below.
