Aston Collection - Additional Information
Exceptional standards of materials and manufacturing ensure our upholstery fabrics meet full contract flame retardant specifications and yet still provide an important combination of durability with welcoming comfort.
The extravagance of genuine hide for upholstery has been reproduced for durable and cost effective FR contract furnishings with the naturally dimpled ostrich and the smooth lustrous Aston.
Intended for severe contract and heavy domestic primary upholstery applications, and comes in 14 traditional colourways, including palettes selected to tone with Lattice and Ostrich. In addition, three new and exciting metallic finishes have been created - Bronze, Gold and Silver.
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio195373.main.001-aston-814-espresso-small.jpg
Colourway
Base Cloth
814 Espresso
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196056.main.002-aston-807-mushroom-small.jpg
Colourway
Base Cloth
807 Mushroom
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196093.main.003-aston-815-buff-small.jpg
Colourway
Base Cloth
815 Buff
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196131.main.004-aston-823-chablis-small.jpg
Colourway
Base Cloth
823 Chablis
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196176.main.005-aston-805-cream-small.jpg
Colourway
Base Cloth
805 Cream
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196212.main.006-aston-300-gold-small.jpg
Colourway
Base Cloth
300 Gold
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196252.main.007-aston-801-tan-small.jpg
Colourway
Base Cloth
801 Tan
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196293.main.008-aston-817-chestnut-small.jpg
Colourway
Base Cloth
817 Chestnut
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196331.main.009-aston-407-burgundy-small.jpg
Colourway
Base Cloth
407 Burgundy
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196371.main.010-aston-400-red-small.jpg
Colourway
Base Cloth
400 Red
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196412.main.011-aston-213-aubergine-small.jpg
Colourway
Base Cloth
213 Aubergine
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196462.main.012-aston-116-navy-small.jpg
Colourway
Base Cloth
116 Navy
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196500.main.013-aston-100-blue-small.jpg
Colourway
Base Cloth
100 Blue
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196529.main.014-aston-228-bottlegreen-small.jpg
Colourway
Base Cloth
228 Bottle Green
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196573.main.015-aston-204-moss-small.jpg
Colourway
Base Cloth
204 Moss
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196612.main.016-aston-905-dove-small.jpg
Colourway
Base Cloth
905 Dove
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196649.main.017-aston-904-pewter-small.jpg
Colourway
Base Cloth
904 Pewter
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio196684.main.018-aston-900-black-small.jpg
Colourway
Base Cloth
900 Black
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane
94% Vinyl / 6% Polyurethane
Martindale abrasion resistance:
100,000+ rubs
100,000+ rubs
End use:
Contract upholstery
Contract upholstery
Tested according to BS5852 part 2 ignition source 5, EN1021/2, marine standard
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Aston Collection Fabric Design: Aston
Open Aston Design
In order to view a design in more detail or to order a free sample, click on an image below.
