Cadet Collection - Additional Information
A range of specialist upholstery fabrics has been created by Panaz to meet the needs of hospitals, residential homes and other caring environments. Fabrics impact on our appreciation and perception of our surroundings, helping to create an atmosphere of comfort and consideration for patients and staff. Panaz have worked with hospitals and care homes throughout the UK in helping them create their desired impression. Our project refereces are our best endorsement. Panaz fabrics can be found in many of the world's largest institutions and establishments - and many of our customers use our fabrics and services again and again.
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199147.main.004-cadet-amathus-460308-fawn.jpg
Colourway
Base Cloth
804 Fawn
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199478.main.008-cadet-amathus-552013-moss.jpg
Colourway
Base Cloth
204 Moss
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199909.main.012-cadet-amathus-552014-coralpink.jpg
Colourway
Base Cloth
605 Coral Pink
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio200134.main.016-cadet-amathus-552015-sky.jpg
Colourway
Base Cloth
134 Sky
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio276522.main.020-cadet-amathus-460310-henna.jpg
Colourway
Base Cloth
404 Henna
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277242.main.024-cadet-amathus-460311-jade.jpg
Colourway
Base Cloth
201 Jade
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277424.main.028-cadet-amathus-460312-emerald.jpg
Colourway
Base Cloth
203 Emerald
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.1, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277597.main.032-cadet-amathus-460314-navy.jpg
Colourway
Base Cloth
116 Navy
Amathus
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio198307.main.002-cadet-quattro-460315-fawn.jpg
Colourway
Base Cloth
804 Fawn
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199348.main.006-cadet-quattro-552016-moss.jpg
Colourway
Base Cloth
204 Moss
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199563.main.010-cadet-quattro-552017-coralpink.jpg
Colourway
Base Cloth
605 Coral Pink
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio200027.main.014-cadet-quattro-552018-sky.jpg
Colourway
Base Cloth
134 Sky
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio200239.main.018-cadet-quattro-460317-henna.jpg
Colourway
Base Cloth
404 Henna
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277147.main.022-cadet-quattro-460318-jade.jpg
Colourway
Base Cloth
201 Jade
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277328.main.026-cadet-quattro-460319-emerald.jpg
Colourway
Base Cloth
203 Emerald
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277504.main.030-cadet-quattro-460321-navy.jpg
Colourway
Base Cloth
116 Navy
Quattro
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199028.main.003-cadet-vogue-460301-fawn.jpg
Colourway
Base Cloth
804 Fawn
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199439.main.007-cadet-vogue-552010-moss.jpg
Colourway
Base Cloth
204 Moss
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio199781.main.011-cadet-vogue-552011-coralpink.jpg
Colourway
Base Cloth
605 Coral Pink
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio200084.main.015-cadet-vogue-552012-sky.jpg
Colourway
Base Cloth
134 Sky
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio200282.main.019-cadet-vogue-460303-henna.jpg
Colourway
Base Cloth
404 Henna
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277199.main.023-cadet-vogue-460304-jade.jpg
Colourway
Base Cloth
201 Jade
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,00+ Martindale Abrasion rubs
100,00+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277380.main.027-cadet-vogue-460305-emerald.jpg
Colourway
Base Cloth
203 Emerald
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio277548.main.031-cadet-vogue-460307-navy.jpg
Colourway
Base Cloth
116 Navy
Vogue
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
137
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Coating 98% PVC, 2% PU, Substrate 100% Viscose
Martindale abrasion resistance:
100,000+ Martindale Abrasion rubs
100,000+ Martindale Abrasion rubs
End use:
Contract upholstery vinyl
Contract upholstery vinyl
BS5852 Part 2 Ignition Source 5 (Crib), EN 1021.2, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water (non-alkaline). Rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed immediately (within 15 minutes) with cold water and then cleaned as above. Extreme soiling may be cleanable with a sodium hypochlorite (bleach) solution diluted 10 parts water/1 part bleach. Do not machine wash or dry clean.
File downloads available below:
No downloads available
Cadet Collection Fabric Design: Amathus
In order to view a design in more detail or to order a free sample, click on an image below.
Cadet Collection Fabric Design: Quattro
In order to view a design in more detail or to order a free sample, click on an image below.
Cadet Collection Fabric Design: Vogue
In order to view a design in more detail or to order a free sample, click on an image below.
