Leather Effects - Additional Information
Created for furnishings and decorative accessories in the corporate, leisure and hospitality sectors, the collection is flame retardant to Crib 5 and has also been tested to withstand over 100,000 rubs.
‘Leather Effects’ is typified by two timeless designs: Lattice reproduces the appearance of soft, supple woven leathers, whilst Ostrich offers a subtle dimpled effect. Both are available across five classic colourways of Black, Tan, Chablis, Cream and Espresso, with Lattice in further shades of more vibrant Red, Blue and Green.
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio188102.main.009-le-aston-908-bronze-small.jpg
Colourway
Base Cloth
908 Bronze
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
with 100% cotton base cloth
with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295766.main.010-le-aston-315-antgold-small.jpg
Colourway
Base Cloth
315 AntiqueGold
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295809.main.011-le-aston-901-silver-small.jpg
Colourway
Base Cloth
901 Silver
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295844.main.012-le-aston-814-espresso-small.jpg
Colourway
Base Cloth
814 Espresso
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295875.main.013-le-aston-801-tan-small.jpg
Colourway
Base Cloth
801 Tan
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295908.main.014-le-aston-823-chablis-small.jpg
Colourway
Base Cloth
823 Chablis
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295940.main.015-le-aston-805-cream-small.jpg
Colourway
Base Cloth
805 Cream
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295972.main.016-le-aston-228-bottlegreen-small.jpg
Colourway
Base Cloth
228 Bottle Green
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio296022.main.017-le-aston-900-black-small.jpg
Colourway
Base Cloth
900 Black
Aston
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
630
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
94% Vinyl / 6% Polyurethane with 100% cotton base cloth
Martindale abrasion resistance:
100,000 Martindale rubs
100,000 Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021.1 and EN 1021.2, IMO RES A.652 (16), IMO RES. MSC. 61(67) annex 1, part 8, NFPA 260.
It is important to clean and care for the fabric on a regular basis to maintain its condition and appearance. Most stains can be removed using the wipe clean method.
Wipe clean regularly with a damp cloth to remove dust particles and light grime. Remove spillages immediately with an absorbent dry cloth. For general grime, use a soft brush and tepid soapy water (non-alkaline) and rinse clean with clear water. Dry with an absorbent cloth. Bodily fluids should be removed initially with cold water and then cleaned as above. Never use polish, stain remover or solvent. For extreme instances of heavy soiling 5% bleach solution can be used.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio187823.main.001-le-lattice-814-espresso-small.jpg
Colourway
Base Cloth
814 Espresso
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295399.main.002-le-lattice-801-tan-small.jpg
Colourway
Base Cloth
801 Tan
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295451.main.003-le-lattice-823-chablis-small.jpg
Colourway
Base Cloth
823 Chablis
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295486.main.004-le-lattice-805-cream-small.jpg
Colourway
Base Cloth
805 Cream
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295532.main.005-le-lattice-400-red-small.jpg
Colourway
Base Cloth
400 Red
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295564.main.006-le-lattice-100-blue-small.jpg
Colourway
Base Cloth
100 Blue
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295594.main.007-le-lattice-200-green-small.jpg
Colourway
Base Cloth
200 Green
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio295736.main.008-le-lattice-900-black-small.jpg
Colourway
Base Cloth
900 Black
Lattice
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, IMO A652 (16), NFPA 260
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio188477.main.018-le-ostrich-814-espresso-small.jpg
Colourway
Base Cloth
814 Espresso
Ostrich
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, NFPA 260, IMO A652 (16)
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio296105.main.019-le-ostrich-900-black-small.jpg
Colourway
Base Cloth
900 Black
Ostrich
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, NFPA 260, IMO A652 (16)
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio296138.main.020-le-ostrich-801-tan-small.jpg
Colourway
Base Cloth
801 Tan
Ostrich
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, NFPA 260, IMO A652 (16)
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio296172.main.021-le-ostrich-823-chablis-small.jpg
Colourway
Base Cloth
823 Chablis
Ostrich
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, NFPA 260, IMO A652 (16)
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Fabric Colourway and Description
Weight and Measurements
Composition, Abrasion and End Use
Flammability Ratings
Customer Care Information
File Downloads
images/portfolio/portfolio296200.main.022-le-ostrich-805-cream-small.jpg
Colourway
Base Cloth
805 Cream
Ostrich
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
740
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition:
100% PVC coating, 100% rayon base cloth
100% PVC coating, 100% rayon base cloth
Martindale abrasion resistance:
100,000+ Martindale rubs
100,000+ Martindale rubs
End use:
Contract upholstery
Contract upholstery
BS5852 Part 1 ignition source 0,1, BS5852 Part 2 ignition source 5, EN1021/2, NFPA 260, IMO A652 (16)
Use a brush and tepid soapy water (non-alkaline), rinse with clear water. Never use polish, stain remover or solvent.
File downloads available below:
No downloads available
Leather Effects Fabric Design: Aston
In order to view a design in more detail or to order a free sample, click on an image below.
Leather Effects Fabric Design: Lattice
In order to view a design in more detail or to order a free sample, click on an image below.
Leather Effects Fabric Design: Ostrich
In order to view a design in more detail or to order a free sample, click on an image below.
