Background image of Panaz Roomshot


Stingray Upholstery Collection From Panaz

Stingray

Fresh from its debut at ‘Private View’, Panaz are delighted to announce the arrival of Stingray: a luxurious new ‘faux’ upholstery with a unique and distinctive emboss, reminiscent of its namesake, the Stingray. Select from a subtle pearlised or sophisticated matt effects and a palette of cool urban neutrals or contemporary hues of purple, lime and red. Stingray is flame retardant to Crib 5, durable and antimicrobial to extinguish stale or unpleasant odours. Elegant upholsteries with no compromise on performance – it’s pure Panaz.




Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
904 Pewter
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652n
Customer Care Information
Do not apply polish, solvents or stain removers.nClean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.nThe new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.nWipe clean regularly with a damp cloth to remove dust particles and light soiling.nRemove spillages promptly (within 15 minutes) with an absorbent dry cloth.nFor general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.nBodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.nExtreme soiling/infection control use a 5% sodium hypochlorite bleach solution.nDo not machine wash or dry clean.nnAdditional: Anti-bacterial and Hygienic Material ProtectionnnSevere contract and heavy domestic primary upholstery.nA good room temperature facilitates the application.nATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
905 Dove
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652n
Customer Care Information
Do not apply polish, solvents or stain removers.nClean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.nThe new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.nWipe clean regularly with a damp cloth to remove dust particles and light soiling.nRemove spillages promptly (within 15 minutes) with an absorbent dry cloth.nFor general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.nBodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.nExtreme soiling/infection control use a 5% sodium hypochlorite bleach solution.nDo not machine wash or dry clean.nnAdditional: Anti-bacterial and Hygienic Material ProtectionnnSevere contract and heavy domestic primary upholstery.nA good room temperature facilitates the application.nATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
907 Copper
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652n
Customer Care Information
Do not apply polish, solvents or stain removers.nClean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.nThe new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.nWipe clean regularly with a damp cloth to remove dust particles and light soiling.nRemove spillages promptly (within 15 minutes) with an absorbent dry cloth.nFor general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.nBodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.nExtreme soiling/infection control use a 5% sodium hypochlorite bleach solution.nDo not machine wash or dry clean.nnAdditional: Anti-bacterial and Hygienic Material ProtectionnnSevere contract and heavy domestic primary upholstery.nA good room temperature facilitates the application.nATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
300 Gold
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.nClean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.nThe new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.nWipe clean regularly with a damp cloth to remove dust particles and light soiling.nRemove spillages promptly (within 15 minutes) with an absorbent dry cloth.nFor general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.nBodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.nExtreme soiling/infection control use a 5% sodium hypochlorite bleach solution.nDo not machine wash or dry clean.nnAdditional: Anti-bacterial and Hygienic Material ProtectionnnSevere contract and heavy domestic primary upholstery.nA good room temperature facilitates the application.nATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
192 Ink
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652n
Customer Care Information
Do not apply polish, solvents or stain removers.nClean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean. The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance. Wipe clean regularly with a damp cloth to remove dust particles and light soiling. Remove spillages promptly (within 15 minutes) with an absorbent dry cloth. For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth. Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above. Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
406 Claret
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
401 Amber
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
807 Mushroom
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
900 Black
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
400 Red
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
412 Purple
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
814 Espresso
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available



Stingray Fabric: View Detail

Fabric Colourway and Description
Colourway
Base Cloth
226 Lime
Stingray
Weight and Measurements
Width (cm)
Weight (g/m²)
Height Repeat
Side Repeat
140
720
0
(approx.)
Values in cm (centimetres) where not otherwise stated.
Composition, Abrasion and End Use
Composition:
Coating: 98% PVC, 2% PU Basecloth: 78% Cotton, 22% Polyester
Martindale abrasion resistance:
90,000 Martindale rubs
End use:
Upholstery Fabric
Flammability Ratings
BS7176 Medium Hazard tested to BS5852 Ignition source 0,1 and 5; EN1021.1 and EN1021.2; CAL TB 116 and 117, CA133; NFPA 260 (USA), IMO A652
Customer Care Information
Do not apply polish, solvents or stain removers.Clean and care for the fabric on a regular basis and it will maintain its condition and appearance. Most stains can be removed by wiping clean.The new generation of microfibre cleaning cloths are extremely effective without soap for general care and maintenance.Wipe clean regularly with a damp cloth to remove dust particles and light soiling.Remove spillages promptly (within 15 minutes) with an absorbent dry cloth.For general soiling, use a soft brush with care to avoid abrasive damage to surface and tepid soapy water; wipe again with pure water, dry with an absorbent cloth.Bodily fluids should be removed promptly (within 15 minutes) with cold water and then cleaned as above.Extreme soiling/infection control use a 5% sodium hypochlorite bleach solution. Do not machine wash or dry clean. Additional: Anti-bacterial and Hygienic Material Protection Severe contract and heavy domestic primary upholstery. A good room temperature facilitates the application. ATTENTION: Do not use a felt-tip, ball-point pen or ink to mark
File Downloads
File downloads available below:
No downloads available


Stingray Fabric Design: Stingray

Toggle Fabric Design Section Open Open Stingray Design

In order to view a design in more detail or to order a free sample, click on an image below.

Innovation in Contract Fabrics

Click for additional information on this page


Printing is disabled on the Panaz Web Site
Please see the web site terms of use for more details